Skip to content
Setup FoundrySetup FoundryDoku
latest · 0.9.8.15
latest · 0.9.8.150.9.8.150.9.8.140.9.8.120.9.8.110.9.8.100.9.8.90.9.8.80.9.8.6
DESign in

Design the Install Assist ​

Only Home · Pro · since 0.9.8.5

Purpose ​

Install Assist starts from the USB stick on the target PC, before Windows Setup begins. After booting you see a card in front of the profile's darkened background image: the measurement line at the top, below it the computer name, the target disk and the button with which you confirm wiping the target disk and start the installation. What it measures and how it prepares the disk is described in Install Assist on the target computer.

On this page you choose whether it starts light or dark, and which of four color schemes it uses for the card.

Availability ​

Home and Pro. Free has no such page; there, the Install Assist starts dark in the Blue scheme.

The setting applies to the whole application, not per installation profile.

Steps ​

  1. In the left rail, section Assist, open Design.
  2. Start mode: Dark or Light.
  3. Color scheme: Blue, Green, Orange or Graphite. Move through them with the arrow keys or with a click on a neighbor; the mouse wheel does not switch.
  4. Check the result under Preview.

Every choice applies at once; there is no button to save. The status line reports Appearance saved.

Result ​

Mode and scheme go into install_assist.config.json on the next medium you create; media already created do not change. The Install Assist starts in this mode and scheme and has no switcher of its own.

Notes ​

  • Default: Dark, Blue.
  • Preview: drawn from the same color values the Install Assist uses, but stylized. Text appears as bars, and the layout is not pixel-exact.
  • Background: behind the card, the Install Assist shows the profile's background picture, evenly darkened, the same in both modes. You set the picture under Background picture and logo, not here.
  • Texts of the Install Assist cannot be changed.

If it does not work ​

  • “Design not saved: …” The cause follows the colon. Your choice has not been applied; choose again once the cause is fixed.
  • The Install Assist shows “The settings file on the media could not be read. Setup will continue with the default settings.” install_assist.config.json on the medium is unreadable or damaged. The Install Assist starts dark in Blue, and the name is typed. Create the medium again.

See also ​